Billet wheels are a great way to make your sled stand out in a crowd, or give your sled that custom look at a low price. When going to larger rear wheels, in addition to the wow factor you get, there are also performance gains with your machine, as it takes much less power to pull your track around a larger wheel. When going to a larger rear wheel you require an offset axle, please see our offset axle section for more information.

Our factory sized wheels are the same height & thickness as the stock wheels on your machine, so no modifications to your machine is required. Simply just bolt on.....and see the difference these will make to the look of your machine.

If the wheels are going to be running over studs, then you need to get our wheels with replaceable rubber, if you don't your wheels will still last, they just won't look that nice as the studs will ding them up.

If you don't see your sled listed, don't worry, we can make a wheel for pretty much any sled, please send us an email and we will confirm it for you.

Bearings:

All of our Billet wheels will come with a standard OEM replacement bearing installed in them. If you want a higher grade bearing we are now offering NTN bearings for an additional cost of $7 per bearing. If you want the upgraded bearings please be sure to purchase them at the bottom of each page.

Rubber:

At Tricked-Toys we don't glue to hold our rubber on like all of the other guys, it simply just doesn't last. Our rubber fits into a machined groove in the wheels kind of like a car tire, and the good thing about our rubber is it can be replaced if it gets damaged. Rubber is required if your wheels are going to be running over studs. The other advantage to rubber wheels is they will not get ice build up, which can happen if you don't have rubber on your wheels. We do reccomend rubber wheels if your sled has a 1 ply track, or if you are a high mileage driver. We have been making billet wheels with rubber since 2008 and we have had great results, we have many customers that have over 10,000 km on our wheels with no issues with the rubber failing.

Warranty:

At Tricked-Toys we offer a lifetime warranty on our billet wheels for bending or breaking, so if you are a jumper, or really aggressive rider don't be afraid to put our billet wheels on your sled.

Plastic Wheels:

These type of wheels can be used as OEM replacement wheels for a lot less money then OEM wheels. They are solid black with no design, so they are also suited to the all black stealth look that some people like. Another common use for the 8 inch plastic wheels is to use them as inner wheels on the offset and re-location axles since they are not seen as much.

 

How to Buy:

1. Click on the picture below to select your wheel design, quantity, and sizes

2. At the bottom of each page you find your powder coating and upgraded bearing options

3. Don't forget your nasty nuts, you can find them on the nasty nut page.

 

 

   
 

Bullet Wheel: Click on Picture to Shop for this design

4 Wheel Kit: $325

6 Wheel Kit $475

8 inch: $110

8.5 inch: $120

9 inch: $130

10 inch: $170

11 inch: $200

   
 

Tribal Wheel: Click on Picture to Shop for this design

4 Wheel Kit: $325

6 Wheel Kit $475

8 inch: $110

8.5 inch: $120

9 inch: $130

10 inch: $170

11 inch: $200

   
 

5 Spoke Double Wheel: Click on Picture to Shop for this design

4 Wheel Kit: $325

6 Wheel Kit $475

8 inch: $110

8.5 inch: $120

9 inch: $130

10 inch: $170

11 inch: $200

   
 

8 Spoke Wheel: Click on Picture to Shop for this design

4 Wheel Kit: $325

6 Wheel Kit $475

8 inch: $110

8.5 inch: $120

9 inch: $130

10 inch: $170

11 inch: $200

   
 

Swirl Wheel: Click on Picture to Shop for this design

4 Wheel Kit: $325

6 Wheel Kit $475

8 inch: $110

8.5 inch: $120

9 inch: $130

10 inch: $170

11 inch: $200

   
 

T5 Wheel: Click on Picture to Shop for this design

4 Wheel Kit: $325

6 Wheel Kit $475

8 inch: $110

8.5 inch: $120

9 inch: $130

10 inch: $170

11 inch: $200

   
 

Plastic Wheel: Click on Picture to Shop for this design

8 inch: $110

 

   
     

 

Upgraded NTN Bearings and C-Clip

All wheels will come with a standard OEM replacement bearing installed. If you want an upgraded NTN bearing please purchase here.

 

NTN Bearing and C-Clip Installed

Price: $7 per wheel

 

Powder Coating for Billet Wheels:

Get your Billet Wheels powder coated in any of our colors

Price: $15 per wheel

Price: $60 for a 4 wheel kit

Price: $90 for a 6 wheel kit

Single Wheels:

Style
Color

4 Wheel Kit:

Style
Color

6 Wheel Kit:

Style
Color

 

 
 
  Please share your pictures and follow us on Facebook and Instagram.....@trickedtoys
 

 

 

 

  • Snowbike Big Wheel Kits
  • Mototrax Snowbike kits
  • Billet Brake Fluid Tanks
  • Rattle Stopper
  • Quick Connect Hitch
  • Bite Harder Carbide Sharpener
  • Ski-Z ice scratchers
  • Nasty Nut Wrenches
  • Polaris Rush pull cord handles now available
  • Oil Tank Inserts now available
  • Check out our new 'Bullet' wheel design in our picture section
  • Snow Flap Savers
  • XP/XR Splash Guards to prevent belt slippage
  • Billet Brake Levers, reservoir caps, spring adjuster blocks and Yamaha gas caps
  • Risers now available
  • 11 inch wheels now available , see products section for more info
  • 10 inch re-location axles now available , see products section for more info
  • we now carry all C&A skis, see products section for more info
  • billet gas caps are now available , see products section for more info
  • Mountain sled drop brackets, check out the products section for more info
  • REV XP Pull Cord Handles now available, check out the products section for more info
  • 10 inch wheels now available, check out the products section for more info
  • 7.8 inch wheels now available for REV XP Longtrack, check out the products section for more info
  • Check out our clearance section for some great deals